NTX LCD REMOTE CONTROL

SAMLEX AMERICA
Included with all NTX models. Use the control panel for remote operation and convenient status monitoring. Remote comes with 16' of connecting wire. Informative LCD display indicates: Battery voltage, Output power (bar graph), Input fault, Output fault.
Stock #Retail
439-14
114.30

INVERTER REMOTE W/ LCD DISPLAY

For PST-1500, PST-2000 & PST-3000
SAMLEX AMERICA
The RC-300 is an optional LCD panel remote control for use with PST-1500-12/24/48, PST-2000-12/24, PST-3000-12/24 and PST-300S-12E/24E inverters. LCD displays AC Volts, AC Amps, frequency, power (watts), and power factor. LED Indicators for overload, over temperature and power. Includes 25’ cable.
Stock #Retail
439-9
181.05

160 AMP AUTO CHARGER/ISOLATOR

160-Amps
SAMLEX AMERICA
He ACR-160 combines battery banks for charging and isolates them when charging has stopped. It provides priority for charging only the starter battery first and protects from excessive discharging of the starter battery. The Automatic Charge Isolator is also referred to as a battery separator, battery isolator or an automatic charging relay.
Stock #Retail
440-3
294.95

30-Amp Transfer Switch 213.4mm L X 228.6mm W X 81.3mm H

SAMLEX AMERICA
Whether you're using solar, batteries or a generator to power your AC devices on the road, chances are, you're going to want to use shore power when it's available. Connect a Samlex Transfer Switch to your generator or to your inverter/battery bank and have your AC source switched automatically to shore power when you plug in.
Stock #Retail
441-35
548.70

1000 WATT INSTALLATION KIT

Fuse 100 AMP-12V Inverter 600-1000 Watts & 24V 600-2000 Watts.
SAMLEX AMERICA
Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.
Stock #Retail
441-36
338.30

2000 WATT INSTALLATION KIT

Fuse 200 AMP-12V Inverter 1000-2000 Watts & 24V 2000-3000 Watts.
SAMLEX AMERICA
Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.
Stock #Retail
441-37
389.30

2500 WATT INSTALLATION KIT

Fuse 300 AMP-12V Inverter 2000-2500 Watts & 24V 3000-4000 Watts.
SAMLEX AMERICA
Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.
Stock #Retail
441-38
525.45

3500 WATT INSTALLATION KIT

Fuse 400 AMP-12V Inverter 2500-3500 Watts & 24V 4000-6000 Watts.
SAMLEX AMERICA
Samlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.
Stock #Retail
441-39
970.05

100 AMP FUSE ASSEMBLY

SAMLEX AMERICA
Simple and economical circuit protection. Use when connecting an inverter to a battery bank, protect your equipment with these 100A, 200A and 300A fuse assemblies. Assembly includes a fuse bar, fuse, insulating protective cap and required hardware. Replacement fuse also available (MRBF-100,200,300).
Stock #Retail
441-40
104.22

200 AMP FUSE ASSEMBLY

SAMLEX AMERICA
Simple and economical circuit protection. Use when connecting an inverter to a battery bank, protect your equipment with these 100A, 200A and 300A fuse assemblies. Assembly includes a fuse bar, fuse, insulating protective cap and required hardware. Replacement fuse also available (MRBF-100,200,300).
Stock #Retail
441-41
104.22

300 AMP FUSE ASSEMBLY

SAMLEX AMERICA
Simple and economical circuit protection. Use when connecting an inverter to a battery bank, protect your equipment with these 100A, 200A and 300A fuse assemblies. Assembly includes a fuse bar, fuse, insulating protective cap and required hardware. Replacement fuse also available (MRBF-100,200,300).
Stock #Retail
441-42
104.22

400 AMP FUSE ASSEMBLY

400 AMP Fuse Block
SAMLEX AMERICA
Connect your battery bank to two inverters using different sized fuses. Comes with a double pole fuse bar, double protective insulating cap and required hardware. (Fuses not included but can be purchased separately MRBF-100,200,300).
Stock #Retail
441-43
372.30

100A REPLACEMENT FUSE

100-Amp Replacement Fuse
SAMLEX AMERICA
Samlex fuse assemblies and replacement fuses.
Stock #Retail
441-44
43.51

200A REPLACEMENT FUSE

200-Amp Replacement Fuse
SAMLEX AMERICA
Samlex fuse assemblies and replacement fuses.
Stock #Retail
441-45
43.51

300A REPLACEMENT FUSE

300-Amp Replacement Fuse
SAMLEX AMERICA
Samlex fuse assemblies and replacement fuses.
Stock #Retail
441-46
43.51

400A REPLACEMENT FUSE

400-Amp Replacement Fuse
SAMLEX AMERICA
Samlex fuse assemblies and replacement fuses.
Stock #Retail
441-47
309.40

DOUBLE FUSE BAR

Double Pole Fuse Bar W/ Hardware & Insulating Cap - No Fuse
SAMLEX AMERICA
Connect your battery bank to two inverters using different sized fuses. Comes with a double pole fuse bar, double protective insulating cap and required hardware. (Fuses not included but can be purchased separately MRBF-100,200,300).
Stock #Retail
441-48
92.91

EVO-RC-PLUS REMOTE CONTROL

Remote Control For EVO F Series Inverter/Chargers
SAMLEX AMERICA
The EVO-RC-PLUS is an intelligent remote control designed specifically for use with Samlex Evolution™ F Series of Inverter/Chargers. View real-time activity on the alpha numeric LCD display with 4 rows of 20 character while the unit is operating: Output voltage, Frequency, Amps, Watts, Volt Amps, Power Factor, Battery Voltage, Battery Current, Solar Input Current and more. For use with: EVO-1212F, EVO-1212F-HW, EVO-1224F, EVO-1224F-HW.
Stock #Retail
441-7
328.95

200 AMP BATTERY GUARD

200-Amps
SAMLEX AMERICA
The universal programmable Battery Guard (BG) prevents the excessive discharge of the battery (which would damage the battery) and protects electronic appliances against over voltage. The BG200 battery guard has an Automatic Board System Detection; the BG automatically detects the battery voltage (12 or 24V). The BG200 battery guard is capable of carrying 200A continuous load and 210A transient load. There is a choice out of 10 on/off threshold voltage programs, for both 12V and 24V battery systems, which can be easily programmed.
Stock #Retail
442-6
517.70

SOLAR EXTENSION CABLES-10'

Solar Extension Cables with MC4 Female and Male connectors. 12 AWG, 30 Amp rating. Includes: Positive and Negative cable.
Stock #Retail
448-5
43.51

SOLAR EXTENSION CABLES-20'

Solar Extension Cables with MC4 Female and Male connectors. 12 AWG, 30 Amp rating. Includes: Positive and Negative cable.
Stock #Retail
448-6
75.81

PARALLEL BRANCH CONNECTORS

MC4 Branch connector combines the output of two MC4 enabled solar panels to increase Arc recharge speed.
Stock #Retail
448-7
26.41

MC4/SAE SOLAR ADAPTER

MC4 to SAE Adapter for Powerstations and RV Solar System.
Stock #Retail
448-8
32.11

MOUNTING SYSTEM & HARDWARE

Mounting Brackets & Hardware
SAMLEX AMERICA
Samlex Solar SM5-KIT, flat surface mounting brackets is designed to mount any solar panel to a flat surface on a RV, remote locations, boat or utility vehicle. The SM5-Kit is included with Samlex Solar Charging Kits, Samlex Solar Expansion Kits or it is sold separately. Contains: 4 x 5-hole aluminum mounting brackets. Stainless steel hardware.
Stock #Retail
449-14
232.73

ADJ. SOLAR PANEL TILT MOUNT

Adjustable Solar Tiltmount
SAMLEX AMERICA
Samlex aluminum adjustable solar mounts allow you to tilt your panel for optimal sun exposure, amplifying solar energy collection by up to 50%. Weather resistant aluminum construction. Choose your incline according to the time of the year – optimal for winter RVing. Over 30 adjustable settings between 0-90o! Samlex Solar RV panel ADJ-28, tilt mounts are adjustable to fit any of the Samlex solar panels from the off-grid Solar Charging Kits. Contains: 2 x 28" Mounting Rails for base support. 2 x 28" Mounting Rails for supporting solar panel. 2 x 14" Aluminum Brackets for setting tilt angle. Carriage bolts & Wing nuts.
Stock #Retail
449-15
258.23

CONNECTING WIRES

SAMLEX AMERICA
Samlex Solar SCW-20-2 cables are used to connect Samlex solar panels to the SCS-30 Samlex Solar Charge Controller or to other solar panels in the off-grid Samlex Solar Charging Kits. The SCW-20-2 cables come with the Samlex Solar Charging Kits, Samlex Solar Expansion Kits or are sold separately. Weather Resistant. Packaged in pairs.
Stock #Retail
449-16
242.93

Solar Panel Branch Connectors - Parallel

SAMLEX AMERICA
Samlex Solar SBC-2 Branch Connectors are waterproof Y-connectors that make it possible to parallel connect Samlex Solar Panels with the multi-contact cables that are included with the Samlex Solar Charging Kits and Samlex Solar Expansion Kits. Easy to install, Snap-in" type of safety locking tabs. Contacts are sealed against ingress of dust and water. Contains: 2 x solar panel branch connectors. Packaged in pairs, female & male per package.
Stock #Retail
449-17
151.02

Multi-Contact Connectors

SAMLEX AMERICA
Samlex Solar MC4-2 connectors are used to series connect Samlex solar panels to the SCS-30 Samlex Solar Charge Controller or to other solar panels in the off-grid Samlex Solar Charging Kits. The MC4-2, male & female connectors attach to multi-contact cables, SCW-20-2 that come with the Samlex Solar Charging Kits, Samlex Solar Expansion Kits or are sold separately. Easy to install, Snap-in” type of safety locking tabs. Contacts are sealed against ingress of dust and water. Contains: 2 x solar panel branch connectors. Packaged in pairs, female & male per package.
Stock #Retail
449-18
92.25

2-PIN XLR SOLAR PANEL ADAPTER

2-Pin XLR Adapter
SAMLEX AMERICA
2-pin adapter for use with battery cable supplied with MSK Series Portable Solar Charging Kits. Adapter is compatible with other charging kits.
Stock #Retail
449-36
62.51

MSK-EXT EXTENSION CABLE - 33'

MSK Extension Cable - 33'
SAMLEX AMERICA
Extension cable for use with MSK Series Portable Solar Charging Kits. Wire gauge #12, 30ft length. Connection: SB 50A, 600V
Stock #Retail
449-37
122.22

BATTERY TEMPERATURE SENSOR

Temperature Sensor For #449-10
SAMLEX AMERICA
Battery Temperature Sensor Model No.DC-BTS-A-C is designed for use with Samlex Solar Charge Controller Model No.SCC-30AB(#449-10). It senses the temperature of the battery installation and sends this information to the Charge Controller, which automatically adjusts its voltage to ensure proper battery charging depending on the ambient temperature of the battery installation. Ring terminal with embedded sensor. Bare Positive (+) end (Red wire). Bare Negative (-) end (Black wire with red stripe). 10 Meters of two wire color coded cable.
Stock #Retail
449-7
98.10

NETWORK CABLE - 25'

Network Cable, 25'
XANTREX
Xanbus Network Cable is required for connection between Freedom SW series inverter/chargers, System Control Panel, Automatic Generator Start module, Freedom Sequence, and other Xanbus Enabled devices.
Stock #Retail
450-12
79.61

NETWORK CABLE - 75'

Network Cable, 75'
XANTREX
Xanbus Network Cable is required for connection between Freedom SW series inverter/chargers, System Control Panel, Automatic Generator Start module, Freedom Sequence, and other Xanbus Enabled devices.
Stock #Retail
450-13
104.22

12V IGNITION LOCKOUT SWITCH

Stock #Retail
450-5
156.42

FREEDOM SW REMOTE ADAPTER

XANTREX
When installing the Xantrex Freedom SW inverter/charger, normally a new Xanbus network cable must also be installed for the inverter to communicate with System Control Panel and other Xanbus devices. However, the recreational vehicle may already have a control panel installed with a regular telephone cable (or a Xantrex remote cable) and replacing the existing telephone cable with a new Xanbus network cable may not be practical.The Freedom SW Remote Adapter allows Xanbus-enabled devices to establish a Xanbus network using a 4 pin RJ11 (standard telephone cable) or a 6 pin RJ12 (Xantrex remote cable) that comes supplied and installed in many recreational vehicles. This enables you to install the Freedom SW like a drop-in replacement and reduces the likeliness you will have to run a new remote cable to your System Control Panel in your Freedom SW installation.The Freedom SW Remote Adapter is a cost-effective solution to reuse the existing telephone cable to establish a Xanbus network with a new Freedom SW inverter.
Stock #Retail
450-9
51.11

15 AMP FLUSH MOUNT CONTROLER

Controller W/ LED 15A, Dimensions 187 x 96 x 44mm, Weight 0.35kg.
SAMLEX AMERICA
The Steca PR charge controllers were launched in the year 2004 as the fifth generation of charge controller technology (up to 720Wp). This high class state of the art product upgrades the Steca Solarix series by a customer designed LCD which shows the accurate state of charge (SOC) in percent and as battery gauge symbol. The heart of the controller is the integrated circuit called ANONICII, which contains the improved regulation software based on a self learning algorithm
Stock #Retail
6449-12
244.80